From advanced manufacturing processes, including special cold drawing and cold pliger not just precision for sizes, but also enhance material substrutes density by cold pilger process. The ID is cold drawing to a 15Ra(0.4µm) finished, by Hydrogen bright annealed process removed tube lubrication and optimum anti-corrosion ability, stress free, good mechanical properties follow by precision cleaning process to removed any residual contaminants, simulated natural light inspection at both ends verifies cleaning before the tubes are nitrogen purged and capped.(2023/Jan/13 14:49:23)]]>
With the smoothest finish in the industry for conveying liquids or gases. Typically produced by seamless bright annealed tube or pipe, the TIG welding tube also available.
The ID is supplied with an electropolished finish of 10Ra (0.25µm) or smoother. Advantages of Ding Ten’s electropolished tube/pipe:
1.Better corrosion.
2.Improved chrome/iron ratio ≥ 1.5
3.Improved carbon layer thickness ≤ 10 Angstroms
4.Improved CrO/FeO ≥ 2.2
5.SEM Defect Counts ≤ 40
6.Smoothest finished, Mirro-like
7.Enhance flow characteristics
8.Improved product purity
9.Improved cleanability.
For the dairy, food, beverage, pharmacutical, BPE and other markets.
Ding Ten Sanitary Tubing exceeds the high standards in the industry, The ID is mechanically polished(M.P.) to 20Ra(0.5µm) finished or special cold drawing plus cold pilger and bright anealed special processed to 15Ra(0.4µm) finished to meet ASTM A270, 3A, and BPE standards.
Each tube is eddy current tested to conform to ASTM A249 follow by specialized cleaning and packaging to maintain contaminant-free tubing.(2023/Jan/13 14:50:45)]]>
Pioneering Thinking for Top of the B.A.
Tubing by C.F.B.A Patent Process.
1. One D VS. 3D Quality.
People only care about tubing’s tradition quality (surface roughness Ra value of I.D. & O.D, material composition, dimensions, )
DTI also care about tubing’s inside material structure from the best grain structure, density & higher mechanical properties. (3D, care).
2. 30%H2+N2BA. VS. 100% H2 BA Process. Partial Recrystallization VS. Completed Recrystallization.
We use 100% H2 for our bright annealed process, without N2 pickup, without intergrnular corrsive with optimum metallurgical condition to enhance performance.
3. Quality VS. Consistent Quality. Brand New Quality VS. Years Quality. Bead Worked & Bead Reduced VS. Cold Forged.
In CFBA process, whole raw tube was forged and inside surface was forged into Ra≦12 µIn/0.3 µm or better. Without any mechanical polished, chemical polished or electro polished.
Regular tube/pipe might varyform batch to batch. Even single tube to tube. Consistent quality of cold forged. Complete reduced and proper bright annealing step are require for homogenization of tube. This tubing is true hight purity tubing.
Form the grain size of microstructure, {higher purity & corrosion resistance to higher density (hardest tempers /tensile/strength)are superior worldwide manufacture remain high weld ability (Creq/Nieq≧1.45)}.
Designed for critical and purity applications such as semiconductor manufacturing, Ding Ten's high purity tubing delivery of gases, chemicals and solvents, or use in ultra High vacuum piping for reducing out gas rate.
From advanced manufacturing processes, including special cold drawing and cold forged not just precision for sizes, but also enhance material substrutes density by cold forged process. The ID is cold drawing to a 15 Ra(0.4µm) finished, by Hydrogen bright annealed process removed tube lubrication and optimum anti-corrosion ability, stress free, good mechanical properties follow by precision cleaning process to removed any residual contaminants, simulated natural light inspection at both ends verifies cleaning before the tubes are nitrogen purged and capped.
半无缝管用于取代传统有缝及无缝抛光管, 以精密溶接焊接管加以冷锻(cold forged), 抽拉延伸, 光辉热处理, 无尘室超纯水清洗后的半无缝管其焊道金相组织, 机械强度特性和母材(coil)相同, 达到无缝管等级, 若锻压比够其品质可超越一般无缝管.
传统溶接管的焊道金相呈现铸造树枝状晶, 借由本公司BA 冷锻管材专利制程专利加以冷锻出优质锻造管, 整支管子重从内到外, 从RA 到材质密度(金相组织)超越半导体厂和生技制药产业需求.
High purity ba, ep tubing in continous coils type, max. length 200 meters
Pioneering Thinking for Top of the B.A.
Tubing by C.F.B.A Patent Process.
1. One D VS. 3D Quality.
People only care about tubing’s tradition quality (surface roughness Ra value of I.D. & O.D, material composition, dimensions, )
DTI also care about tubing’s inside material structure from the best grain structure, density & higher mechanical properties. (3D, care).
2. 30%H2+N2BA. VS. 100% H2 BA Process. Partial Recrystallization VS. Completed Recrystallization.
We use 100% H2 for our bright annealed process, without N2 pickup, without intergrnular corrsive with optimum metallurgical condition to enhance performance.
3. Quality VS. Consistent Quality. Brand New Quality VS. Years Quality. Bead Worked & Bead Reduced VS. Cold Forged.
In CFBA process, whole raw tube was forged and inside surface was forged into Ra≦12 µIn/0.3 µm or better. Without any mechanical polished, chemical polished or electro polished.
Regular tube/pipe might varyform batch to batch. Even single tube to tube. Consistent quality of cold forged. Complete reduced and proper bright annealing step are require for homogenization of tube. This tubing is true hight purity tubing.
Form the grain size of microstructure, {higher purity & corrosion resistance to higher density (hardest tempers /tensile/strength)are superior worldwide manufacture remain high weld ability (Creq/Nieq≧1.45)}.
Pioneering Thinking for Top of the B.A.
Tubing by C.F.B.A Patent Process.
1. One D VS. 3D Quality.
People only care about tubing’s tradition quality (surface roughness Ra value of I.D. & O.D, material composition, dimensions, )
DTI also care about tubing’s inside material structure from the best grain structure, density & higher mechanical properties. (3D, care).
2. 30%H2+N2BA. VS. 100% H2 BA Process. Partial Recrystallization VS. Completed Recrystallization.
We use 100% H2 for our bright annealed process, without N2 pickup, without intergrnular corrsive with optimum metallurgical condition to enhance performance.
3. Quality VS. Consistent Quality. Brand New Quality VS. Years Quality. Bead Worked & Bead Reduced VS. Cold Forged.
In CFBA process, whole raw tube was forged and inside surface was forged into Ra≦12 µIn/0.3 µm or better. Without any mechanical polished, chemical polished or electro polished.
Regular tube/pipe might varyform batch to batch. Even single tube to tube. Consistent quality of cold forged. Complete reduced and proper bright annealing step are require for homogenization of tube. This tubing is true hight purity tubing.
Form the grain size of microstructure, {higher purity & corrosion resistance to higher density (hardest tempers /tensile/strength)are superior worldwide manufacture remain high weld ability (Creq/Nieq≧1.45)}.
Heat Exchanger tubes(2019/May/27 10:55:31)]]>
Designed for critical and purity applications such as semiconductor manufacturing, Ding Ten's high purity tubing delivery of gases, chemicals and solvents, or use in ultra High vacuum piping for reducing out gas rate.
From advanced manufacturing processes, including special cold drawing and cold forged not just precision for sizes, but also enhance material substrutes density by cold forged process. The ID is cold drawing to a 15 Ra(0.4µm) finished, by Hydrogen bright annealed process removed tube lubrication and optimum anti-corrosion ability, stress free, good mechanical properties follow by precision cleaning process to removed any residual contaminants, simulated natural light inspection at both ends verifies cleaning before the tubes are nitrogen purged and capped.
半无缝管用于取代传统有缝及无缝抛光管, 以精密溶接焊接管加以冷锻(cold forged), 抽拉延伸, 光辉热处理, 无尘室超纯水清洗后的半无缝管其焊道金相组织, 机械强度特性和母材(coil)相同, 达到无缝管等级, 若锻压比够其品质可超越一般无缝管.
传统溶接管的焊道金相呈现铸造树枝状晶, 借由本公司BA 冷锻管材专利制程专利加以冷锻出优质锻造管, 整支管子重从内到外, 从RA 到材质密度(金相组织)超越半导体厂和生技制药产业需求.
Custom Gas Fittings
VCR Metal Gasket Face Seal
VCO O-Ring Face Seal
Double Ferrule Tube Fittings
PFA Fine Thread Flare Fittings (2019/May/27 11:45:08)]]>
With the smoothest finish in the industry for conveying liquids or gases. Typically produced by seamless bright annealed tube or pipe, the TIG welding tube also available.
The ID is supplied with an electropolished finish of 10Ra (0.25µm) or smoother. Advantages of Ding Ten’s electropolished tube/pipe:
1.Better corrosion.
2.Improved chrome/iron ratio ≥ 1.5
3.Improved carbon layer thickness ≤ 10 Angstroms
4.Improved CrO/FeO ≥ 2.2
5.SEM Defect Counts ≤ 40
6.Smoothest finished, Mirro-like
7.Enhance flow characteristics
8.Improved product purity
9.Improved cleanability.(2023/Jan/13 14:58:14)]]>
With the smoothest finish in the industry for conveying liquids or gases. Typically produced by seamless bright annealed tube or pipe, the TIG welding tube also available.
The ID is supplied with an electropolished finish of 10Ra (0.25µm) or smoother. Advantages of Ding Ten’s electropolished tube/pipe:
1.Better corrosion.
2.Improved chrome/iron ratio ≥ 1.5
3.Improved carbon layer thickness ≤ 10 Angstroms
4.Improved CrO/FeO ≥ 2.2
5.SEM Defect Counts ≤ 40
6.Smoothest finished, Mirro-like
7.Enhance flow characteristics
8.Improved product purity
9.Improved cleanability.(2023/Jan/13 14:59:04)]]>
1.Expansion Joint(EJMA Standard)
2.Flexible Joint(Manipulator Feedthrough)
3.Accumulator
4.Proportional Tempture Control
5.Packingless Valve, Aseptic Bellows Valve
6.Mechanical Sealing
7.Rotary seal housing
8.Pressure switch
9.Remote flow control
10.Flexible coupling
11.Steam trap(2019/May/27 10:47:12)]]>
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
Better vibration absorptions, highly flexible, special lengths and connector combination are available on request.
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
Pioneering thicking for top quality of bellows.Setting new standard of tough demands state of art manufacture Process, maximum OD and minium pitch.30% Higher spring rate, stroke and life cycles than traditional formed Bellows. Tough durability, Lower outgas rate than edge welded bellows
(2019/May/27 10:48:50)]]>
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
不锈钢 KF 真空伸缩软管.
材质: SS304 & SS316L.
尺寸: NW10 ~ NW50.
法兰: KF to KF, KF to ISO, KF to CF.
长度: Any length.
特殊尺寸及产品, 欢迎来电订制.
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
不锈钢 ISO 真空伸缩软管.
材质: SS304 & SS316L.
尺寸: ISO63 ~ ISO320.
法兰: ISO to ISO, ISO to KF, ISO to CF.
长度: Any length.
特殊尺寸及产品, 欢迎来电订制.
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
不锈钢 CF 真空波纹管.
材质: SS304 & SS316L.
尺寸: CF1.33 ~ CF350.
法兰: CF to CF, CF to KF, CF to ISO.
长度: Any length.
特殊尺寸及产品, 欢迎来电订制.
在用于生产半导体的机器以及用于产生薄膜的腔室中，波纹管确保密封并且另外保持恒定的密封力。这是因为它灵活的本体与自身的弹簧力相结合。
移动并仍然保持特UHV的防漏是波纹管的要求。最常见的运动是轴向运动，从自由长度开始，波纹管可以被压缩约80％的长度并且膨胀拉伸约20％。可以执行角度运动以及横向运动。设计时横向移动需要更长的长度。一次作动是一个向前和向后运动。
当基板(Substrate Wafer)从一个腔体移动到另一个腔体时，夹持臂被波纹管包围起来时移动且精确定位芯片。对于通过机构或传感器的进给过程，我们的波纹管成功使用于半导体产业，并且外销至德国、美国、新加坡等国家。
Application for edged welded Bellows:
Accumulators
Beam Lines
Cassette Elevators
Chamber-Lift Bellows
Connectors
Couplings - Flexible & Torque
Flexible Connectors/Expansion Joints
Gas Line Flexible Connectors
Gate Valves
Heater Assemblies
Hermetic Feedthroughs
Leak Detectors
Lifters
Pedestal Lifts
Pin Lift Actuators
Reservoirs/Volume Compensators
Sensors
Slit Valves
Spindle Assemblies
Valve Door Modules
Valve Stem Seals
Vibration Isolators
Wafer-Lift Bellows
Wafer Handlers
Wafer Orienters
X-Y-Z Manipulators
1.Expansion Joint(EJMA Standard)
2.Flexible Joint(Manipulator Feedthrough)
3.Accumulator
4.Proportional Tempture Control
5.Packingless Valve, Aseptic Bellows Valve
6.Mechanical Sealing
7.Rotary seal housing
8.Pressure switch
9.Remote flow control
10.Flexible coupling
11.Steam trap
Ptfe Bellows
Pioneering thicking for top quality of bellows.Setting new standard of tough demands state of art manufacture Process, maximum OD and minium pitch.30% Higher spring rate, stroke and life cycles than traditional formed Bellows. Tough durability, Lower outgas rate than edge welded bellows(2019/May/27 10:54:32)]]>
Hollow Shaft Cartridge
Hollow Shaft Flange
Flange Mount
Nut Mount
Thread Mount (2019/Jun/14 15:09:03)]]>
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
1. Axial Expansion Joint
2. Lateral Expansion Joint
3. Angular Expansion Joint
4. Retangular Expansion Joint
5. Custom Fabrication Expansion Joint
不锈钢液压成型波纹管.
材质: SS304 & SS316L.
尺寸: ISO63 ~ ISO320.
法兰: ISO to ISO, ISO to KF, ISO to CF.
长度: Any length.
特殊尺寸及产品, 欢迎来电订制.
Absorbs small amounts of axial, leteral and angular movements.
1. Axial Expansion Joint
2. Lateral Expansion Joint
3. Angular Expansion Joint
4. Retangular Expansion Joint
5. Custom Fabrication Expansion Joint(2019/May/27 11:27:52)]]>
高纯度气体波纹管
Adjustable elasticity, bendability, in high purity gas and vacuum applications.
Absorbs small amounts of axial, leteral and angular movements.
DTI焊接金属波纹管经过精心设计，可同时轴向，角度和平行偏移运动的可能性。它们提供密封的全金属压力屏障和密封，可在一个或多个方向上弯曲，适用真空和正压环境中实现最佳机械运动。
我们为半导体，航空，医疗，精密机械，真空，太阳能，光电和其他高科技市场提供边焊金属波纹管。
Application for edged welded Bellows:
Accumulators
Beam Lines
Cassette Elevators
Chamber-Lift Bellows
Connectors
Couplings - Flexible & Torque
Flexible Connectors/Expansion Joints
Gas Line Flexible Connectors
Gate Valves
Heater Assemblies
Hermetic Feedthroughs
Leak Detectors
Lifters
Pedestal Lifts
Pin Lift Actuators
Reservoirs/Volume Compensators
Sensors
Slit Valves
Spindle Assemblies
Valve Door Modules
Valve Stem Seals
Vibration Isolators
Wafer-Lift Bellows
Wafer Handlers
Wafer Orienters
X-Y-Z Manipulators
1.Expansion Joint(EJMA Standard)
2.Flexible Joint(Manipulator Feedthrough)
3.Accumulator
4.Proportional Tempture Control
5.Packingless Valve, Aseptic Bellows Valve
6.Mechanical Sealing
7.Rotary seal housing
8.Pressure switch
9.Remote flow control
10.Flexible coupling
11.Steam trap
(2022/May/11 16:28:52)]]>
材质: 不锈钢304 / 不锈钢316L
flexible Sprinkler Stainless Steel Hose (2019/Sep/28 16:01:04)]]>
- 结构中的波纹管可吸收Engine 运转中的热应力和振动
- 不锈钢材质提高使用温度和耐腐蚀性
- 可弯曲波纹管和可旋转法兰更容易安装
- 一体成型设计提高安全性和使用寿命
Adjustable elasticity, bendability, in automotive applications.
Absorbs small amounts of axial, leteral and angular movements.
(2022/Apr/20 11:10:21)]]>
- 结构中的波纹管可吸收Engine 运转中的热应力和振动
- 不锈钢材质提高使用温度和耐腐蚀性
- 可弯曲波纹管和可旋转法兰更容易安装
- 一体成型设计提高安全性和使用寿命
Adjustable elasticity, bendability, in automotive applications.
Absorbs small amounts of axial, leteral and angular movements.
- 结构中的波纹管可吸收Engine 运转中的热应力和振动
- 不锈钢材质提高使用温度和耐腐蚀性
- 可弯曲波纹管和可旋转法兰更容易安装
- 一体成型设计提高安全性和使用寿命
Adjustable elasticity, bendability, in automotive applications.
Absorbs small amounts of axial, leteral and angular movements.
Flexible bellows tubes in structures that absorb thermal stress and vibration in Engine's running
Stainless steel material improves high temperature and corrosion resistance
One piece design and rotary flanges Are easier to install in an integrated molding design to improve safety and life cycle
Adjustable elasticity, bendability, in automotive applications.
Absorbs small amounts of axial, leteral and angular movements.
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
不锈钢 KF 真空伸缩软管.
材质: SS304 & SS316L.
尺寸: NW10 ~ NW50.
法兰: KF to KF, KF to ISO, KF to CF.
长度: Any length.
特殊尺寸及产品, 欢迎来电订制.
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
Pioneering thicking for top quality of bellows.Setting new standard of tough demands state of art manufacture Process, maximum OD and minium pitch.30% Higher spring rate, stroke and life cycles than traditional formed Bellows. Tough durability, Lower outgas rate than edge welded bellows
(2019/May/27 10:03:43)]]>
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
Better vibration absorptions, highly flexible, special lengths and connector combination are available on request.
1.Expansion Joint(EJMA Standard)
2.Flexible Joint(Manipulator Feedthrough)
3.Accumulator
4.Proportional Tempture Control
5.Packingless Valve, Aseptic Bellows Valve
6.Mechanical Sealing
7.Rotary seal housing
8.Pressure switch
9.Remote flow control
10.Flexible coupling
11.Steam trap
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
不锈钢 ISO 真空蛇腹管.
材质: SS304 & SS316L.
尺寸: ISO63 ~ ISO320.
法兰: ISO to ISO, ISO to KF, ISO to CF.
长度: Any length.
特殊尺寸及产品, 欢迎来电订制.
- 高真空，超高真空，科学和研究应用
- 化学，石油和天然气，石化和一般重工业
- 食品，乳制品和生技 / 制药应用
DTI不锈钢软管由304/ 316不锈钢制成，可提供各种标准和非标准端接头，以便在最终应用中提供最大的制造灵活性和易于安装。一些可用的配件如下:
- 真空法兰：KF，Con-Flat（CF），ISO（K＆F），VG，VF
- 标准螺纹接头（PP，PT，NPT，JIC）
- 焊接管端（公制或英制管端接，用于对接焊等）
- 专业配件：SWAGELOK VCO ，VCR，PARKER，
除了任何其他所需的工业测试外，所有DTI的软管产品都经过氦气洩漏测试。DTI可为许多敏感应用提供全面的清洁及高压清洗。
可以制造特殊长度和超大软管，从1/4” 到12”，软管长度的典型制造公差为总长度的+/- 2％。
CF真空波纹管/ 不锈钢 CF 真空伸缩软管.
材质: SS304 & SS316L.
尺寸: CF1.33 ~ CF350.
法兰: CF to CF, CF to KF, CF to ISO.
长度: Any length.
特殊尺寸及产品, 欢迎来电订制.
我们为半导体，航空，医疗，精密机械，真空，太阳能，光电和其他高科技市场提供边焊金属波纹管。
Application for edged welded Bellows:
Accumulators
Beam Lines
Cassette Elevators
Chamber-Lift Bellows
Connectors
Couplings - Flexible & Torque
Flexible Connectors/Expansion Joints
Gas Line Flexible Connectors
Gate Valves
Heater Assemblies
Hermetic Feedthroughs
Leak Detectors
Lifters
Pedestal Lifts
Pin Lift Actuators
Reservoirs/Volume Compensators
Sensors
Slit Valves
Spindle Assemblies
Valve Door Modules
Valve Stem Seals
Vibration Isolators
Wafer-Lift Bellows
Wafer Handlers
Wafer Orienters
X-Y-Z Manipulators
1.Expansion Joint(EJMA Standard)
2.Flexible Joint(Manipulator Feedthrough)
3.Accumulator
4.Proportional Tempture Control
5.Packingless Valve, Aseptic Bellows Valve
6.Mechanical Sealing
7.Rotary seal housing
8.Pressure switch
9.Remote flow control
10.Flexible coupling
11.Steam trap
Ptfe Bellows
Pioneering thicking for top quality of bellows.Setting new standard of tough demands state of art manufacture Process, maximum OD and minium pitch.30% Higher spring rate, stroke and life cycles than traditional formed Bellows. Tough durability, Lower outgas rate than edge welded bellows(2019/May/27 10:38:09)]]>
真空角阀,真空 Y 型阀,真空 Z 型阀(Vacuum Inline Valve)
DTI 真空角阀端口可选用各种真空法兰，包括CF，KF，ISO，VG/VF或ASA法兰。并提供定制端口长度，法兰和无波纹管阀门等服务。
真空范围
角阀密封件的氦洩漏率为10-9 std.cc./sec。Viton密封阀可用于超高真空10-9 Torr 。
阀门驱动
手动阀门采用Acme螺纹和自润滑青铜螺母，运行平稳耐用。气动阀门通常是NORMAL CLOSE(空气开启，Bellows弹关闭)，以便在发生电气或空气故障时立即关闭。所有阀门均可使用此驱动选项。大多数尺寸都有空气开启，空气关闭和Bellows辅助作为选项。所有气动阀的工作气压为60至80 psig。
烘烤性
标准Viton密封阀可连续烘烤至150°C，间歇时间可烘烤至204°C。高温Kalrez O形圈可作为选项，允许这些阀门连续烘烤至220°C。
真空角阀本体为304或316不锈钢管拉孔成型，材料密度高无沙孔适合超高真空应用并且消除尖锐的内角并改善导通性。阀门经过电解抛光，可更快的抽气，更低的除气性和更好的耐腐蚀性。焊接波纹管由AM-350不锈钢制成，具有耐腐蚀性和出色的柔韧性。当阀门打开时，波纹管从侧面端口完全缩回，消除了波纹管上杂质的积聚和颗粒的产生，提高波纹管使用寿命。DTI阀门可以在任何位置操作，并且可以快速拆卸执行器以进行常规检查，而无需拆卸系统管路。
(2019/May/27 10:11:05)]]>
Vacuum Diaphragm Valve(2019/May/27 10:19:18)]]>
材质: 不锈钢 SS304 & SS316L.
尺寸: KF16~ISO100.
产品种类: 真空角阀, 真空球阀, 真空蝶阀, 真空隔膜阀, 真空视窗
法兰口: KF, ISO, CF, KF to ISO, KF to CF, ISO to CF.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:31:21)]]>
真空级二通球阀
真空级三通球阀
Vacuum Ball valve 2 Way /3 way Type(2019/May/27 10:18:45)]]>
Vacuum Butterfly Valve(2019/May/27 10:20:05)]]>
材质: 不锈钢 SS304 / 不锈钢 SS316L
不锈钢真空逆止阀
Vacuum Check Valve
VCO O-Ring Face
Double Ferrule Tube Fittings
PFA Fine Thread Flare Fittings
PTFE/Teflon Swagelok 接头/管件
真空配管, 化工配管, 食品配管,生技制药配管, 半导体配管 等工程(2019/May/27 10:10:13)]]>
材质: SS304 or SS316L.
尺寸: OD12.7mm ~ OD152.4mm.
产品种类: Elbow, tangent elbow, tee, reducing tee, cross, reducing cross, reducer.
特殊尺寸及产品, 欢迎来电订制.(2019/May/27 11:19:57)]]>
Vacuum Sight Glass/Vacuum Viewport(2019/May/27 10:38:55)]]>
CGA V-1-2005 Standard材质: SS316L, VIM+VAR 316L, VAR 316L
垫片材质: Nickel 200, PCTFE, Aluminum
尺寸: 1/4"
表面处理: BA, EP Grade
(2019/May/27 11:23:43)]]>
标准组件包括：
KF法兰，KF夹具，KF中心圈，KF弯头，KF三通，KF十字通，KF六通，KF转接头，KF真空软管，KF包网真空软管，KF真空波纹管，KF转VCR转接头，KF转SWAGELOK转接头， KF螺牙转接头（PT，NPT等），KF法兰转接头 (VG， VF， ASA，JIS，DIN等)，KF FEEDTHROUGH，KF 视窗法兰。
ISO法兰，ISO-K夹具，ISO中心圈，ISO弯头，ISO三通，ISO十字通，ISO 六通，ISO转接头，ISO大小头，ISO真空软管，ISO包网真空软管，ISO真空波纹管，ISO视窗法兰。
CF法兰（固定/可旋转），CF标准或镀银螺母和螺栓，CF无氧铜和镀银垫片，CF盲螺母，CF零长度大小头，CF连接管，CF弯头，CF三通，CF十字通和CF六通 (立方体)，CF大小头，CF真空软管，CF包网软管，CF波纹管，CF边缘焊接波纹管， CF 转接头 (VCR，VCO，SWAGELOK，PT，NPT， VG， VF， ASA，JIS，DIN等)，CF FEEDTHROUGH，CF Viewport法兰。
定制真空管件包括：
- 特定长度和方向的非标准转接头。
- 特殊真空歧管/ 分支管(Manifolds)，双头法兰直管 (Spool)，弯头，三通，四通，五通，六通等。
- 特殊真空软管和波纹管（超大尺寸，单层或双层）。
- 真空帮浦零件（工业配件 - 氦气洩漏测试）。
- 真空阀门零件，特殊加工的CF或ISO法兰，带有焊接的视窗。
(2019/Mar/6 13:39:31)]]>
标准组件包括：
KF法兰，KF夹具，KF中心圈，KF弯头，KF三通，KF十字通，KF六通，KF转接头，KF真空软管，KF包网真空软管，KF真空波纹管，KF转VCR转接头，KF转SWAGELOK转接头， KF螺牙转接头（PT，NPT等），KF法兰转接头 (VG， VF， ASA，JIS，DIN等)，KF FEEDTHROUGH，KF 视窗法兰。
ISO法兰，ISO-K夹具，ISO中心圈，ISO弯头，ISO三通，ISO十字通，ISO 六通，ISO转接头，ISO大小头，ISO真空软管，ISO包网真空软管，ISO真空波纹管，ISO视窗法兰。
CF法兰（固定/可旋转），CF标准或镀银螺母和螺栓，CF无氧铜和镀银垫片，CF盲螺母，CF零长度大小头，CF连接管，CF弯头，CF三通，CF十字通和CF六通 (立方体)，CF大小头，CF真空软管，CF包网软管，CF波纹管，CF边缘焊接波纹管， CF 转接头 (VCR，VCO，SWAGELOK，PT，NPT， VG， VF， ASA，JIS，DIN等)，CF FEEDTHROUGH，CF Viewport法兰。
定制真空管件包括：
- 特定长度和方向的非标准转接头。
- 特殊真空歧管/ 分支管(Manifolds)，双头法兰直管 (Spool)，弯头，三通，四通，五通，六通等。
- 特殊真空软管和波纹管（超大尺寸，单层或双层）。
- 真空帮浦零件（工业配件 - 氦气洩漏测试）。
- 真空阀门零件，特殊加工的CF或ISO法兰，带有焊接的视窗。
(2019/May/25 16:25:54)]]>
材质: SS304 & SS316L.
尺寸: NW10 ~ NW50.
产品种类: Centering assembly, outer inner centering assembly, adaptive centering assembly.
O ring: Morisei FFKM, FKM/Viton, PTFE, EPDM.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:22:13)]]>
High Vacuum Components and High Vacuum Fittings for High Vacuum System or UHV Vacuuum System Components
日本制 O 型环
日本进口 O RINGS
森清化工 PERFLUOROELASTOMER O RINGS
Special or non-standard sizes available upon request.
材质: SS304 & SS316L.
尺寸: ISO63 ~ ISO320.
产品种类: Centering assembly.
O ring: Morisei FFKM, FKM/Viton, PTFE, EPDM.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:22:54)]]>
材质: SS304 & SS316L .
尺寸: CF1.33 ~ CF350.
产品种类: 盲板/盲盖, 双层法兰, 螺栓法兰, 短颈头法兰, 长颈头法兰, nipple.
固定式/旋转式.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:21:31)]]>
材质: SS304 / SS316L.
尺寸: ISO63 ~ ISO320.
产品种类: 盲板/盲盖, 盲板挖孔, 螺栓法兰, 长颈头法兰.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:20:48)]]>
材质: SS304 & SS316L .
尺寸: CF1.33 ~ CF350.
产品种类: CF Vacuum Flange
垫圈材质: Copper, viton.
特殊尺寸及产品, 欢迎来电订制.(2019/Jan/25 14:59:14)]]>
标准组件包括：
KF法兰，KF夹具，KF中心圈，KF弯头，KF三通，KF十字通，KF六通，KF转接头，KF真空软管，KF包网真空软管，KF真空波纹管，KF转VCR转接头，KF转SWAGELOK转接头， KF螺牙转接头（PT，NPT等），KF法兰转接头 (VG， VF， ASA，JIS，DIN等)，KF FEEDTHROUGH，KF 视窗法兰。
ISO法兰，ISO-K夹具，ISO中心圈，ISO弯头，ISO三通，ISO十字通，ISO 六通，ISO转接头，ISO大小头，ISO真空软管，ISO包网真空软管，ISO真空波纹管，ISO视窗法兰。
CF法兰（固定/可旋转），CF标准或镀银螺母和螺栓，CF无氧铜和镀银垫片，CF盲螺母，CF零长度大小头，CF连接管，CF弯头，CF三通，CF十字通和CF六通 (立方体)，CF大小头，CF真空软管，CF包网软管，CF波纹管，CF边缘焊接波纹管， CF 转接头 (VCR，VCO，SWAGELOK，PT，NPT， VG， VF， ASA，JIS，DIN等)，CF FEEDTHROUGH，CF Viewport法兰。
定制真空管件包括：
- 特定长度和方向的非标准转接头。
- 特殊真空歧管/ 分支管(Manifolds)，双头法兰直管 (Spool)，弯头，三通，四通，五通，六通等。
- 特殊真空软管和波纹管（超大尺寸，单层或双层）。
- 真空帮浦零件（工业配件 - 氦气洩漏测试）。
- 真空阀门零件，特殊加工的CF或ISO法兰，带有焊接的视窗。
(2019/Mar/6 13:44:40)]]>
标准组件包括：
KF法兰，KF夹具，KF中心圈，KF弯头，KF三通，KF十字通，KF六通，KF转接头，KF真空软管，KF包网真空软管，KF真空波纹管，KF转VCR转接头，KF转SWAGELOK转接头， KF螺牙转接头（PT，NPT等），KF法兰转接头 (VG， VF， ASA，JIS，DIN等)，KF FEEDTHROUGH，KF 视窗法兰。
ISO法兰，ISO-K夹具，ISO中心圈，ISO弯头，ISO三通，ISO十字通，ISO 六通，ISO转接头，ISO大小头，ISO真空软管，ISO包网真空软管，ISO真空波纹管，ISO视窗法兰。
CF法兰（固定/可旋转），CF标准或镀银螺母和螺栓，CF无氧铜和镀银垫片，CF盲螺母，CF零长度大小头，CF连接管，CF弯头，CF三通，CF十字通和CF六通 (立方体)，CF大小头，CF真空软管，CF包网软管，CF波纹管，CF边缘焊接波纹管， CF 转接头 (VCR，VCO，SWAGELOK，PT，NPT， VG， VF， ASA，JIS，DIN等)，CF FEEDTHROUGH，CF Viewport法兰。
定制真空管件包括：
- 特定长度和方向的非标准转接头。
- 特殊真空歧管/ 分支管(Manifolds)，双头法兰直管 (Spool)，弯头，三通，四通，五通，六通等。
- 特殊真空软管和波纹管（超大尺寸，单层或双层）。
- 真空帮浦零件（工业配件 - 氦气洩漏测试）。
- 真空阀门零件，特殊加工的CF或ISO法兰，带有焊接的视窗。
(2019/May/25 16:24:38)]]>
材质: 铝合金/ 不锈钢 304.
尺寸: NW10 ~ ISO320.
产品种类: Hinged, single claw, double claw. Heata pipe/tubing calmp
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:24:07)]]>
材质: 不锈钢304 & 316L.
尺寸: OD6.35mm ~ OD152.4mm.
厚度: 视需求.
生产处理: 退火/电解抛光
长度: 4 meter or 6 meter.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:31:57)]]>
材质: SS304 & SS316L.
尺寸: ISO63 ~ ISO320.
产品种类: ISO to ISO, ISO to KF, ISO to CF.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:26:52)]]>
材质: SS304 & SS316L.
尺寸: CF1.33 ~ CF250.
产品种类: 弯头, 三通, 四通, 大小头.
Option: Non-rotatable or Rotatable.
特殊尺寸及产品, 欢迎来电订制.(2019/Jan/25 11:12:04)]]>
材质: SS304 & SS316L.
尺寸: CF1.33 ~ CF350.
产品种类: CF to CF, CF to KF, CF to ISO, CF to VCR.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:27:36)]]>
高纯度气体管件
Swagelok/Parker Hannifin/Cajon Standard Metal Gasket Face Seal VCR UHP Micro Fittings
真空配管, 化工配管, 食品配管,生技制药配管, 半导体配管 等工程
VCR fittings 全名 Variable Compression Ration Fittings or
Vacuum Coupling Radiation Fittings
(2019/May/27 11:21:29)]]>1.Expansion Joint(EJMA Standard)
2.Flexible Joint(Manipulator Feedthrough)
3.Accumulator
4.Proportional Tempture Control
5.Packingless Valve, Aseptic Bellows Valve
6.Mechanical Sealing
7.Rotary seal housing
8.Pressure switch
9.Remote flow control
10.Flexible coupling
11.Steam trap(2019/May/27 11:42:35)]]>
- 高灵敏度氦气洩漏测试。
- UHV清洗和热处理。
- 真空帮浦性能报告。
- UHV焊接技术和结构，以提供最佳的UHV性能。
可选功能包括......
- 电解抛光。
- 安装支架，吊耳，框架和可调支撑或活动轮。
DTI可提供多种基本腔室设计，包括球形，圆柱形，矩形和钟罩形状。
整个腔体室或各个关键端口可以使用多种技术或定制组件进行水冷或加热。
(2019/May/27 10:25:32)]]>
材质: TEFLON, PTFE, PFA, PVDF
Stainless Steel Hose Adapter/Sanitary Flexible Hose(2019/Aug/28 16:56:41)]]>
1.减少工安意外
2.提升管路使用年限
3.降低施工成本
4.管路维修容易
5.降低配管材料成本
6.提升管路焊接品质 (2023/Oct/6 13:55:50)]]>
Stainless Steel KF, ISO, CF Adaptor
SS304 & SS316L material.
NW10 ~ NW300.
Type: KF to KF, tapped, KF to ISO, KF to CF, KF to VCR, KF to swagelok.
Special or non-standard sizes available upon request.(2022/Dec/6 16:45:06)]]>
自HV或UHV工作室的进料口，并实现真空和大气之间的物体转移。因此，它们最
常用于离子注入系统，OMBD系统和电子束蒸发系统中，以用于诸如半导体制造等
高真空应用。它们还用于金属涂饰工艺和航空工业中，以开发防腐蚀涂料。
-
阀是全孔大流量的，不会阻碍流体流动，因此不会因摩擦而造成损失。
闸阀最常用于开/关应用，而不是调节流量。
(2023/Mar/4 14:59:51)]]>
Foreline Traps
Stainless Steel Sieve Trap
Copper Sieve Trap
不锈钢滤网, Teflon/ptfe 滤心, 无菌滤芯
Cone Mill Screens 粉碎整粒机/高密度冲孔网/Cone Mill Conical Screen(2019/May/27 11:45:50)]]>
材质: SS304 & SS316L .
尺寸: CF1.33 ~ CF350.
产品种类: 盲板/盲盖, 双层法兰, 螺栓法兰, 短颈头法兰, 长颈头法兰, nipple.
固定式/旋转式.
特殊尺寸及产品, 欢迎来电订制.(2019/May/27 13:23:38)]]>
材质: SS304 & SS316L.
尺寸: 1.5" ~ 12"
产品种类: 盲板/盲盖, 双层法兰, 螺栓法兰, 短颈头法兰, 长颈头法兰, nipple.
固定式/旋转式.
特殊尺寸及产品, 欢迎来电订制.(2021/Dec/27 11:48:54)]]>
High Vacuum Components and High Vacuum Fittings for High Vacuum System or UHV Vacuuum System Components
日本制 O 型环
日本进口 O RINGS
PERFLUOROELASTOMER O RINGS
Special or non-standard sizes available upon request.
High Vacuum Components and High Vacuum Fittings for High Vacuum System or UHV Vacuuum System Components
日本制垫片
日本TOMBO铁氟龙垫片(又称PTFE垫片,Teflon垫片)
NICHIAS 蜻蜓牌 PTFE GASKET, PERFLUOROELASTOMER O RINGS
Special or non-standard sizes available upon request.
Stainless Steel Vacuum Exhaust Silencer
SS304 & SS316L material.
Custom made Type
BOC EDWARDS A50588000 ES602 IGX 100L DRY VACUUM PUMP SILENCER KF40
Flange: KF, ISO, CF, KF to ISO, KF to CF, ISO to CF.
Special or non-standard sizes available upon request.
With the smoothest finish in the industry for conveying liquids or gases. Typically produced by seamless bright annealed tube or pipe, the TIG welding tube also available.
The ID is supplied with an electropolished finish of 10Ra (0.25µm) or smoother. Advantages of Ding Ten’s electropolished tube/pipe:
1.Better corrosion.
2.Improved chrome/iron ratio ≥ 1.5
3.Improved carbon layer thickness ≤ 10 Angstroms
4.Improved CrO/FeO ≥ 2.2
5.SEM Defect Counts ≤ 40
6.Smoothest finished, Mirro-like
7.Enhance flow characteristics
8.Improved product purity
9.Improved cleanability.(2023/Jan/13 14:44:41)]]>
From advanced manufacturing processes, including special cold drawing and cold pliger not just precision for sizes, but also enhance material substrutes density by cold pilger process. The ID is cold drawing to a 15Ra(0.4µm) finished, by Hydrogen bright annealed process removed tube lubrication and optimum anti-corrosion ability, stress free, good mechanical properties follow by precision cleaning process to removed any residual contaminants, simulated natural light inspection at both ends verifies cleaning before the tubes are nitrogen purged and capped.(2023/Jan/13 14:43:45)]]>
规范: ASME BPE 2005.
尺寸: OD12.7mm ~ OD152.4mm.
产品种类: Elbow, tee, reducing tee, cross, reducing cross, reducer, tube.
特殊尺寸及产品, 欢迎来电订制.
Compatiable with
1. Alfa Laval bpe fittings
2. Bradford bpe fittings
3. Swagelok bpe fittings
4. VNE bpe fittings
5. WCB bpe fittings(2019/May/25 17:07:27)]]>
材质: SS304 or SS316L.
尺寸: OD12.7mm ~ OD152.4mm.
产品种类: Elbow, tangent elbow, tee, reducing tee, cross, reducing cross, reducer.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 16:30:11)]]>
规范: ASME BPE 2005.
尺寸: OD12.7mm ~ OD152.4mm.
产品种类: Elbow, tee, reducing tee, cross, reducing cross, reducer, tube.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 17:06:49)]]>
材质: 不锈钢 316L.
尺寸: OD6.35mm ~ OD152.4mm.
产品种类: Diaphragm valve.
特殊尺寸及产品, 欢迎来电订制.(2019/May/25 17:08:18)]]>
Pioneering Thinking for Top of the B.A.
Tubing by C.F.B.A Patent Process.
1. One D VS. 3D Quality.
People only care about tubing’s tradition quality (surface roughness Ra value of I.D. & O.D, material composition, dimensions, )
DTI also care about tubing’s inside material structure from the best grain structure, density & higher mechanical properties. (3D, care).
2. 30%H2+N2BA. VS. 100% H2 BA Process. Partial Recrystallization VS. Completed Recrystallization.
We use 100% H2 for our bright annealed process, without N2 pickup, without intergrnular corrsive with optimum metallurgical condition to enhance performance.
3. Quality VS. Consistent Quality. Brand New Quality VS. Years Quality. Bead Worked & Bead Reduced VS. Cold Forged.
In CFBA process, whole raw tube was forged and inside surface was forged into Ra≦12 µIn/0.3 µm or better. Without any mechanical polished, chemical polished or electro polished.
Regular tube/pipe might varyform batch to batch. Even single tube to tube. Consistent quality of cold forged. Complete reduced and proper bright annealing step are require for homogenization of tube. This tubing is true hight purity tubing.
Form the grain size of microstructure, {higher purity & corrosion resistance to higher density (hardest tempers /tensile/strength)are superior worldwide manufacture remain high weld ability (Creq/Nieq≧1.45)}.
Designed for critical and purity applications such as semiconductor manufacturing, Ding Ten's high purity tubing delivery of gases, chemicals and solvents, or use in ultra High vacuum piping for reducing out gas rate.
From advanced manufacturing processes, including special cold drawing and cold forged not just precision for sizes, but also enhance material substrutes density by cold forged process. The ID is cold drawing to a 15 Ra(0.4µm) finished, by Hydrogen bright annealed process removed tube lubrication and optimum anti-corrosion ability, stress free, good mechanical properties follow by precision cleaning process to removed any residual contaminants, simulated natural light inspection at both ends verifies cleaning before the tubes are nitrogen purged and capped.
半无缝管用于取代传统有缝及无缝抛光管, 以精密溶接焊接管加以冷锻(cold forged), 抽拉延伸, 光辉热处理, 无尘室超纯水清洗后的半无缝管其焊道金相组织, 机械强度特性和母材(coil)相同, 达到无缝管等级, 若锻压比够其品质可超越一般无缝管.
传统溶接管的焊道金相呈现铸造树枝状晶, 借由本公司BA 冷锻管材专利制程专利加以冷锻出优质锻造管, 整支管子重从内到外, 从RA 到材质密度(金相组织)超越半导体厂和生技制药产业需求.
For the dairy, food, beverage, pharmacutical, BPE and other markets.
Ding Ten Sanitary Tubing exceeds the high standards in the industry, The ID is mechanically polished(M.P.) to 20Ra(0.5µm) finished or special cold drawing plus cold pilger and bright anealed special processed to 15Ra(0.4µm) finished to meet ASTM A270, 3A, and BPE standards.
Each tube is eddy current tested to conform to ASTM A249 follow by specialized cleaning and packaging to maintain contaminant-free tubing.(2023/Jan/13 14:45:52)]]>
High purity ba, ep tubing in continous coils type, max. length 200 meters(2023/Jan/13 14:48:00)]]>
Heat Exchanger tubing(2023/Feb/3 15:37:12)]]>
Forged process, 锻造一体成型端板/管帽
材质: 不锈钢 304/316L(2019/May/27 10:30:57)]]>
SS304 & SS316L material.
40MPS 1" to 4"
Option: Viton, EPDM, Silicone
Special or non-standard sizes available upon request.
PV Gaskets / PV 垫片 / PV 垫圈
(2019/May/27 11:26:39)]]>
Sanitary/Hygienic/ASME BPE Stainless Steel Spool/Adapter
SS304 & SS316L material.
1/8" to *"
Type: Clamp, Union, Flange, Swagelok VCR, Swagelok VCO, etc.
Special or non-standard sizes available upon request.(2022/Dec/6 16:48:44)]]>
Corning Standard, Spinner Flask Bioreactor
血清瓶出入口配件/零组件/附件(2019/May/27 11:40:06)]]>
规范: ASME BPE . 3A, BS 4825, DIN 11850, IDF ,ISO 2037 ,JIS G 3447,SMS
尺寸: OD 12.7mm ~ OD 304.8mm.
产品种类: Elbow, tee, reducing tee, cross, reducing cross, reducer, tube.
特殊尺寸及产品, 欢迎来电订制.(2019/May/27 11:46:23)]]>
规范: ASME BPE . 3A, BS 4825, DIN 11850, IDF ,ISO 2037 ,JIS G 3447,SMS
尺寸: OD 12.7mm ~ OD 304.8mm.
产品种类: Elbow, tee, reducing tee, cross, reducing cross, reducer, tube.
特殊尺寸及产品, 欢迎来电订制.(2019/May/27 11:49:14)]]>
材质: SS304 / SS316L.
尺寸: 1/2" ~ 6".
产品种类:
The different types of Cam lock fittings (Standard Types)
- Type A - male adaptor with female NPT/PT thread
- Type B - female cam coupler with Male NPT/PT thread
- Type C - female cam coupling with hose barb end
- Type D - female cam coupler with FNPT/FPT Thread
- Type E - cam adaptor with hose barb end
- Type F - camlock adaptor with male NPT/PT Thread
- Type DC - Dust caps for male adaptors
- Type DP - Dust Plugs for female couplers
特殊尺寸及产品, 欢迎来电订制.
Sanitary Rotary Pumps / Waukesha / Nakakin Type
凸轮转子泵/ 老达利泵浦/ 卫生级齿轮帮浦/ 定量帮浦/ 正排量泵浦(2019/May/25 17:13:15)]]>
食品卫生级高压离心帮浦/泵浦
Sanitary High Pressure Centrifugal Pumps
SE SERIES
SE Series 模组化设计概念，不同叶片组合能达到高输出压力。以先进科技制造SE 型高效率离心帮浦有宽广应用，适合各种产业和流体。
搭配 IEC 标准马达 ( standard IEC frame motors) 可达到高泵浦效率 (40-70%)
最大流量 (Flow rates) 200m³/h，最高扬程 ( heads) 150 m (15 bar) 。
食品卫生级离心泵浦/帮浦/马达
Sanitary Centrifugal Pumps
CS Series centrifugal pumps are designed to meet the highest requirements of the food, beverage, pharmaceutical and chemical industries. A large number of pump sizes are available, as a result of the modular construction concept to which the pump components are designed.
The pump shaft is supported by one or two bearings (depending on the pump size). This provides both high strength and the convenience of supplying pumps with either standard IEC motors or bare shaft.
Flow rates range from 0 to 570 m³/h with heads up to 100 m(10 bar), low NPSHr and high efficiencies – saving energy and money. The CS Series is suitable for thin liquids to products with viscosities up to 800 centipoises.
(2019/May/25 17:12:40)]]>
食品卫生级螺旋帮浦/ 泵浦 / 正排量泵浦/ 定量帮浦
Sanitary Progressive Cavity Pumps
The Progressive Cavity Pump belongs to the positive displacement pumps family.
The working principle is based on the volumetric displacement of the pumped products by the main pump elements, a metal rotor rotating within a static elastomeric stator.
This principle is well suited to pumping viscous to semi-abrasive liquids, including solids in suspension. PC pumps deliver a smooth flow, which can be varied in proportion to the speed of the drive motor. Benefits include self-priming and the ability to operate flexibly at both low and high rotational speeds, while maintaining a high volumetric efficiency.
PC pumps are renowned for their versatility in handling a wide range of different media.
To facilitate this the range of accessories includes various different pre-feeding hoppers and augers for viscous liquids.
All models are available in a choice of AISI 304 or 316 stainless steel. Cast iron is offered the MI series only. Flow rates can range from less than1 l/h up to 130m³/h. Maximum discharge pressures can be up to 24 bar.
(2019/May/25 17:11:09)]]>连续式快速溶解帮浦
由高速粉体导引翼和帮浦旋转叶轮组成
结构精简, 适合各种精密工业 (2019/May/27 11:24:30)]]>
集合剪切,破碎,分散,混合,溶解,均质等功能为一体
运用剪力帮浦将产品强力剪切,破裂冲击,离心挤压, 液层磨擦等功能将不同产品快速分散乳化(2019/May/27 11:25:05)]]>
食品卫生级自吸式帮浦/泵浦 CSF
Sanitary Self-priming Pumps
A-AS SERIES
The A and AS self-priming range are used for pumping simple liquids like water, CIP solutions, raw milk, whey, juice and syrups. They can also handle foaming liquids and are especially suited for applications where air or gas is entrained in the pumped liquid. A very popular duty is CIP scavenge and return.
Quick disassembly makes them particularly suitable for applications in the food and beverage industries, where regular inspection or micro testing may be required.
Flow rates up 50 m³/h, and heads up to 40 m (4 bar) are available.
(2019/May/25 17:13:46)]]>Sanitary High Pressure Centrifugal Pumps
CSM SERIES
The CSM Series has been developed using the CS Series modular design concept. CSM pumps have multiple impellers, which can generate high discharge pressures. Large bearings support the pump shaft to provide both reliable operation on arduous duties and the convenience of being able to use standard IEC frame motors.
Flow rates up to 50 m³/h and heads up to 150 m (15 bar) can be achieved.
CSM pumps have been designed for high system pressure up to 40 bar.
The wetted parts are CF-3M/AISI 316L, the major components are investment cast and electro polished. Pump connections conforming to most international standard are available, as are other options.
(2019/May/25 17:14:28)]]>1. 单片弧形转子设计, 产品破损率世界最低
2. 柔和输送, 高扬程高自吸能力
3. 超低脉冲, 适合含大颗粒流体输送
4. 可双向运转, 出入口角度可任意调整
5. 单轴设计, 结构精简, 节省能源
(2019/May/25 17:10:23)]]>
Sanitary Rotary Pumps / Waukesha / Nakakin Type
凸轮转子泵/老达利泵浦/卫生级齿轮帮浦/定量帮浦/正排量泵浦(2019/May/27 13:07:12)]]>
Sanitary Rotary Pumps / Waukesha / Nakakin Type
凸轮转子泵/老达利泵浦/卫生级齿轮帮浦/定量帮浦/正排量泵浦(2019/May/27 13:16:55)]]>
Osaka Sanitary High Pressure Centrifugal Pumps
SE SERIES
SE Series 模组化设计概念，不同叶片组合能达到高输出压力。以先进科技制造SE 型高效率离心帮浦有宽广应用，适合各种产业和流体。
搭配 IEC 标准马达 ( standard IEC frame motors) 可达到高泵浦效率 (40-70%)
最大流量 (Flow rates) 200m³/h，最高扬程 ( heads) 150 m (15 bar) 。
(2019/May/27 13:21:46)]]>
Sanitary Filter
不锈钢滤网, 五层烧结网, Teflon/ptfe 滤心, 无菌滤芯
Cone Mill Screens 粉碎整粒机/ 高密度冲孔网/ Cone Mill Conical Screen
IWAI Sanitary Filter
不锈钢网, Teflon/ptfe 滤心, 无菌滤芯
Cone Mill Screens 粉碎整粒机/高密度冲孔网/Cone Mill Conical Screen(2019/May/27 11:41:14)]]>
- Diffusion Welding
- Solid State Bonding
- Pressure Bonding
- Isostatic Bonding
- Hot Press Bonding
- Pressure Joining
- Vacuum Welding
- Thermo Compression Welding
- Liquid State Diffusion Bonding
- Transient Liquid Phase
SS 304, SS 316L
* 内外镜面抛光, 无残留, 适合半导体 , 无尘室使用
* 100% 气密试验, 氦气测漏, 使用安全
* 3A 标准化制造, Tri-Clamp, Ferrule, Gasket, 世界通用, 适合外销
* 全开口设计, 可直接放入内容器(玻璃瓶, 塑胶瓶 等), 使用简单
* 附加 teflon 液位计, Swagelok 接头, 清洗容易,无污染
(2021/Dec/25 16:58:25)]]>3A Sanitary Standards Certified. Authorization Number 1376
Stainless Steel Hose Adapter/Sanitary Flexible Hose
(2019/Aug/28 16:51:04)]]>
vcm 400 available(2019/May/27 10:04:22)]]>
Sanitary Shell Tube Heat Exchanger(2019/May/25 17:26:42)]]>
Tube in tube Heat Exchanger(2019/May/25 17:25:56)]]>
Heat-Exchanger(2019/May/25 17:25:23)]]>
1. 节省能源(缩短CIP时间)
2. 节省CIP药水
3. 无培林设计，无死角，可完全CIP洗净，无污染。
4. 不锈钢316设计，无维修问题。
5. 连续式水刀超强清洁力。
6. 符合FDA材质要求。
表面处理: 内外抛光/电解抛光/喷沙/酸洗
耐压等级: 1-7 bars
密封材质: Silicone / EPDM / Viton / Klarz / Teflon
几何形状: 圆形/椭圆形/方型(2019/May/27 11:41:52)]]>
Stainless Steel Sanitary Pressure Gauge/Thermometer(2019/May/27 09:57:39)]]>
- Division of Flow / 流体分割作用
- Radial mixing / 流体转换作用
- Flow Reverse / 流体反转作用
AIR RELIEF VALVE
Protect Pumps with gas pocket.(2019/May/27 10:05:33)]]>
材质: 不锈钢 304/316, 黑铁(2023/Oct/6 13:57:39)]]>
快速且经济提供热水, 安全且简单设计工艺. 低噪音, 低震动
型号: M34 出入口 3/4" x 3/4"
M114 出入口 1 1/4" x 1 1/4"
(2019/May/25 17:27:18)]]>
Technical, Orbital Welding Services & Valve Units(2019/May/25 17:22:21)]]>
Manifold Tubing
真空管路预制, ba/ep 管路预制, 生技制药管路预制, 卫生食品配管工程(2019/May/25 17:21:39)]]>
最安全/最灵活/最可靠/最简单移动科技
传统轮胎革命产品/取代天车和堆高机 (2019/May/27 10:18:06)]]>
材质: SS304 & SS316L .
尺寸: 15A to 200A
1/2" to 8".
内外表面处理: BA/EP/AP
产品种类: 盲板/盲盖, 双层法兰, 螺栓法兰, 短颈头法兰, 长颈头法兰, nipple.
固定式/旋转式.
特殊尺寸及产品, 欢迎来电订制.(2019/May/27 11:43:54)]]>
BA/EP 气体管路配管工程, 真空配管, 生技配管, 制药配管, 食品卫生配管工程(2019/May/25 17:21:04)]]>
不锈钢光辉热处理炉
适用材料: 不锈钢管,钛管,铜管(2019/May/27 11:43:14)]]>
CIP/SIP(2019/May/25 17:24:48)]]>
Pure Steam Generators(2019/May/25 17:23:33)]]>
WFI:Single and Multiple effect(2019/May/25 17:22:59)]]>
Spectrum Analysis Machine(2019/May/25 17:20:15)]]>
Sanitary Aseptic Pneumatic Diaphragm Valve
Hygienic Diaphragm Valve(2019/May/25 17:17:11)]]>
Sanitary Aseptic Manual Diaphragm Valve
Hygienic Diaphragm Valve(2019/May/25 17:16:27)]]>
Sanitary Aseptic Tank Buttom Diaphragm Valve
Hygienic Diaphragm Valve(2019/May/27 10:27:43)]]>
Sanitary Aseptic T Type Manual Diaphragm Valve(2019/May/27 11:15:23)]]>
Aseptic Pneumatic Control F Type Divert Valve
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
Aseptic Pneumatic L Type Divert Valve
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
Sanitary Pneumatic Butterfly Valve
卫生级蝶阀具有出色的耐用性和实用性且易于安装和维护，适用于各种食品，饮料，生技制药等产业。
(2019/Jan/24 09:59:37)]]>食品卫生级蝶阀
Sanitary Butterfly Valve
Size: from 1/2" to 8"
全不锈钢结构：SS316本体和球
全开口，可在打开位置无限制流动
提供“常闭”，“常开”和“双动”驱动
免维护气动气缸作动器，附1/4英寸多管空气连接
在现场现有阀门上可轻松改装从手动到气动执行器
三件式设计与浮动密封
FDA批准的材料：增强PTFE全包式座垫，减少残留
球阀内表面320# 抛光处理
100％压力测试
三通球阀提供L端口和T端口选项
食品卫生级气动球阀
Sanitary Pneumatic Ball Valve
不锈钢 LITAI 旋转气缸 for clean room application.
单动气缸, 双动/复动汽缸 Type: LITAI-35,LITAI-50,LITAI-63,LITAI-80,LITAI-100,LITAI-100L
DTI 卫生级球阀的全开口直通设计使流路免受障碍物的影响。阀门上的压降减小，且通过阀门的管道的高度没有变化。这些特色让球阀允许在食品，饮料，乳制品，和化学工业中提供高效率且安全的阀类。
全不锈钢结构：SS316本体和球
全开口，可在打开位置无限制流动
提供“常闭”，“常开”和“双动”驱动
免维护气动气缸作动器，附1/4英寸多管空气连接
在现场现有阀门上可轻松改装从手动到气动执行器
三件式设计与浮动密封
FDA批准的材料：增强PTFE全包式座垫，减少残留
球阀内表面320# 抛光处理
100％压力测试
三通球阀提供L端口和T端口选项
材质 : 不锈钢 / 全包式铁弗龙球垫
规格 : 3A / BPE / BS / DIN / IDF / RJT / SMS
尺寸: 1/2" / 3/4" / 1" / 1.5" / 2" / 2.5" / 3" / 4"
卫生食品级球阀
Sanitary Ball Valve/ OSAKA
Pneumatic Control F Type Divert Valve(Without control Box)
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
Pneumatic Control L Type Divert Valve(Without control Box)
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
AIR Blow VALVE(2019/May/27 10:26:15)]]>
Sanitary Aseptic Sample Valve(2019/May/27 10:29:22)]]>
Sanitary Filling Valve
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
Aseptic Pneumatic Control F Type Divert Valve
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
Aseptic Pneumatic L Type Divert Valve
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
Sanitary Aseptic Diaphragm Valve
Hygienic Diaphragm Valve(2019/May/27 11:31:13)]]>
洩压阀防止产品沸腾/均质机安全阀/角型安全阀
Stainless Steel Valve for clean service application.
Back Pressure Valve for CIP application.
Prevent product boiling pressure/tempture (2019/May/27 11:32:01)]]>
Aseptic Pneumatic Control F Type Divert Valve
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
Big size Sanitary Butterfly Valve
Large Diameter Hygienic Butterfly Valve
卫生级蝶阀具有出色的耐用性和实用性且易于安装和维护，适用于各种食品，饮料，生技制药等产业。
(2019/May/27 13:18:07)]]>材质 : 不锈钢 / 全包式铁弗龙球垫
规格 : 2BV-M /3A / BPE / BS / DIN / IDF / RJT / SMS
尺寸: 8A/ 10A/ 15A/ 1/2" / 3/4" / 1" / 1.5" / 2" / 2.5" / 3" / 4"
卫生食品级球阀
Sanitary Ball Valve/ OSAKA
材质 : 不锈钢 / 全包式铁弗龙球垫
规格 : 2BV-M /3A / BPE / BS / DIN / IDF / RJT / SMS
尺寸: 8A/ 10A/ 15A/ 1/2" / 3/4" / 1" / 1.5" / 2" / 2.5" / 3" / 4"
卫生食品级考克阀
Sanitary Cocks Valve/ OSAKA
- 材质: 不锈钢 SS304 / 不锈钢 SS316L
-
在没有向前流动压力的情况下，不锈钢弹簧让挡板返回并使其保持关闭。当有回流压力也会将挡板推入关闭位置。
两种可用的密封选项：O形圈或TRI-CLAMP 垫片方便为维护，而挡板和阀体座之间为金属与金属接触耐用持久，适合长时间的操作。
止回阀由316L不锈钢棒材加工而成，所有抛光面均小于32 Ra，内表面光滑，可实现卓越的CIP清洁效果。
当需要排水时，必须垂直安装。
- 浮动密封设计，在CIP过程中易于清洁不会残留，在高温下具有出色的密封性和出色的耐化学性。
- 重型不锈钢气动作动器，可以有三种选择：NO（常开） - NC（常闭） - DA（双作用）。
- 夹式连接，便于检查和维护。
- 厚壁机械加工球体可确保绝佳的抗热膨胀和收缩性
(2019/May/27 13:25:23)]]>
*Wafer Specifications&Test Report
*Wafer Specifications&Test Report
Indium Phosphide and Related Materials-2
InP Poly-Crystal(2019/May/27 10:01:10)]]>
InP single crystal and polycrystal
GaAs single crystal and polycrystal
GaP single crystal and polycrystal(2019/May/27 10:15:06)]]>
InP single crystal and polycrystal
GaAs single crystal and polycrystal
GaP single crystal and polycrystal(2019/May/27 13:05:28)]]>
VGF 坩锅
VB 坩锅
LEC 坩锅
MBE 坩锅
MOCVD 绝缘板
(2019/May/27 11:16:46)]]>氧化二硼 （B2O3） 由高纯度硼酸生产。它用于 InP, GaAs 生产。但客户也有需求，他们使用 LEC 和/或 VGF 方法处理 GaP 和/或 InAs 晶体生长工艺。三氧化二硼 （B2O3） 由高纯度硼酸生产。它用于 GaAs 生产。但客户也有需求，他们使用 LEC 和/或 VGF 方法处理 GaP 和/或 InAs 晶体生长工艺
VGF 坩锅
VB 坩锅
LEC 坩锅
MBE 坩锅
MOCVD 绝缘板
(2025/Mar/21 15:08:02)]]>Vacuum Gauge
Vacuum Breaker Valve
Vacuum Thermcouple
Vacuum Feedthrough
Vacuum Test Port
(2019/May/27 11:47:15)]]>Vacuum Gauge
Vacuum Breaker Valve
Vacuum Thermcouple
Vacuum Feedthrough
Vacuum Test Port
(2019/May/27 11:47:59)]]>VCR TO KF/ISO/CF/NW
SWAGELOK TO KF/ISO/CF/NW
KF TO ISO/CF/NW/ASA ANSI/VG/VF
ISO TO CF/NW/ASA ANSI/VG/VF
PT/NPT TO KF/ISO/CF/NW/ASA ANSI/VG/VF
(2019/May/27 11:48:38)]]>Metal Hose
Tube Assembly
Spool
Elbow
Tee
Cross
Reducer
Adjustable elasticity, bendability, in high purity gas and vacuum applications.
Absorbs small amounts of axial, leteral and angular movements.(2019/May/27 11:50:54)]]>
NW10 ~ ISO320.
Type: KF Hinged Clamp , Chain Clamp Single claw, Double claw.
Special or non-standard sizes available upon request.(2019/May/27 11:51:27)]]>
High Vacuum Components and High Vacuum Fittings for High Vacuum System or UHV Vacuuum System Components
日本制 O 型环
日本进口 O RINGS
森清化工 PERFLUOROELASTOMER O RINGS
Special or non-standard sizes available upon request.
真空角阀,真空 Y 型阀,真空 Z 型阀 (Vacuum Inline Valve)
真空角阀本体为 304 或 316 不锈钢管拉孔成型，材料密度高无沙孔适合超高真空应用并且消除尖锐的内角并改善导通性。阀门经过电解抛光，可更快的抽气，更低的除气性和更好的耐腐蚀性。焊接波纹管由 AM-350 不锈钢制成，具有耐腐蚀性和出色的柔韧性。当阀门打开时，波纹管从侧面端口完全缩回，消除了波纹管上杂质的积聚和颗粒的产生，提高波纹管使用寿命。DTI 阀门可以在任何位置操作，并且可以快速拆卸执行器以进行常规检查，而无需拆卸系统管路。
我们的真空角阀端口可选用各种真空法兰，包括 CF，KF，ISO，VG/VF或ASA法兰。并提供定制端口长度，法兰和无波纹管阀门等服务。
真空范围
角阀密封件的氦洩漏率为10-9 std.cc./sec。Viton密封阀可用于超高真空10-9 Torr 。
阀门驱动
手动阀门采用Acme螺纹和自润滑青铜螺母，运行平稳耐用。气动阀门通常是NORMAL CLOSE(空气开启，Bellows弹关闭)，以便在发生电气或空气故障时立即关闭。所有阀门均可使用此驱动选项。大多数尺寸都有空气开启，空气关闭和Bellows辅助作为选项。所有气动阀的工作气压为60至80 psig。
烘烤性
标准Viton密封阀可连续烘烤至150°C，间歇时间可烘烤至204°C。高温Kalrez O形圈可作为选项，允许这些阀门连续烘烤至220°C。
(2019/May/27 13:01:34)]]>
真空级球阀
真空级二通球阀
真空级三通球阀
真空级四通球阀
Vacuum Ball valve 2 Way /3 way/ 4way Type
Vacuum Diaphragm Valve(2019/May/27 13:02:50)]]>
Vacuum Butterfly Valve(2019/May/27 13:03:22)]]>
材质: 不锈钢 SS304 & SS316L.
尺寸: KF16~ISO100.
产品种类: 真空角阀, 真空球阀, 真空蝶阀, 真空隔膜阀, 真空视窗
法兰口: KF, ISO, CF, KF to ISO, KF to CF, ISO to CF.
特殊尺寸及产品, 欢迎来电订制.(2019/May/27 13:04:16)]]>
Vacuum Floor Inlet Valve(2019/May/27 13:18:53)]]>
真空级二通球阀
真空级三通球阀
Vacuum Ball valve 2 Way /3 way Type(2023/Nov/30 14:44:25)]]>
材质: Stainless Steel.
尺寸:
产品种类:
典型钢种和特性
|
钢种名称 |
磁性能 |
耐腐蚀性 |
||
|
磁通密度（T） |
保持力（A / m） |
点蚀电位（mV） |
||
|
B10 |
B25 |
|||
|
K-M31 |
1.13 |
1.28 |
150 |
0 |
|
K-M35F（L） |
1.28 |
1.36 |
80 |
-140 |
|
K-M38 |
1.08 |
1.19 |
80 |
240 |
特殊尺寸及产品, 欢迎来电订制.